Many have argued that the Can-Am Maverick X3�s seating angle is a bit too reclined. Sit a bit more upright with PRP�s Can-Am Maverick X3 Seat Lowering Bracket. This kit lowers the front mounting point of the sliding rails by 2� allowing you to get your seating angle just right. The stock Can-Am Maverick X3 slider rails have two mounting points in the front that allows you to adjust your seat into a upper or lower position. PRP�s Seat Lowering Bracket creates a third �extra low� mounting point. Perfect for those who have a low cage, or are installing a large composite seat.

CanAm Maverick X3 Seat Lowering Bracket System Includes:

• Two brackets
• Two bolts
• Two washers
• Two spacers

Unbolt the front of the slider rails from the mounting points. Install each U-Shaped bracket onto the lower mounting point using the supplied hardware and center spacer. Then reinstall the slider rail onto the lowering bracket, re-using the OEM hardware.

May not work on 2020+ models with reinforced cage bars that run underneath the seat.